Perfect for warmer climates where freezing conditions are not a problem, SunMaxx offers our SunMaxx TS ThermoSyphon Systems. These kits include specialized SunMaxx 30 Evacuated Tube Solar Collectors, and a specially engineered 80 Gallon Storage Tank that mounts directly to the top of the solar collector, acting as both a storage tank, and a heater manifold.
Since both components of this system, including the storage, are exterior, it is imperative that you be in a non-freeze climate. The low cost of ThermoSyphon Systems make them ideal for large residential, commercial, municipal, and industrial applications using an open loop (non-glycol) system. With proper installation and system design, the 80 Gallon Thermosyphon System can also be used in Northern, colder climates very successfully.
The 80 Gallon System provides enough hot water capacity to supply a family of 4 or more people, and requires only 78ft of south facing roof space.
System Includes:
- (1) SunMaxx TS ThermoSyphon Collector with built in storage tank
- (1) Hardware/Frame Kit
| Specifications & Ordering |
|
| Collector Type |
1x SunMaxx TS 30 |
| Daily Water Capacity |
80 Gallons |
| Weight |
Approximately 300 Lbs |
| Manufacturer |
Silicon Solar Inc. |
| Tank Volume |
80G (300L) |
| Gross Weight |
176Kg |
| Aperature Area |
47.7Ft2 (4.43m2) |
| Absorber Area |
29.5Ft2 (2.74m2) |
| Tube Diameter |
2.3in (58mm) |
| Tube Length |
78.7in (2m) |
| Glass Material |
Borosilicate Glass |
| Inner/Outer Tank Diameter |
14.8/18.7in (375/475mm) |
| Insulation Layer |
Foaming Plyurethane: 2in (50mm) |
| Outer Tank Material |
Painted Steel |
| Weight |
Approximately 200 Lbs |
| Inner Tank |
Stainless Steel, Argon Welding |
| Inlet/Outlet Pipe Diameter |
0.5in (12mm) |
| Copper Coil Diameter |
0.5in (12mm) |
| Copper Coil Thickness |
0.03in (1mm) |
| Copper Coil Length |
1.4in (35mm) |
| Optimal Flow Rate |
1.5GpM (7LpM) |
| Copper Coil Pressure |
Working: 3Pa-6Pa, Testing: 8Pa |
| Sealing Rubber |
110 Methylsilicon Rubber w/Vinyl |
| Tail Stock |
ABS Plastic |
| Frame Material |
1.5mm Coated Galvanized Steel |
| Reflector Panel |
AL 99.85% Surface Oxidation Treated |
| Frame Angle |
38°/45° |
| Average Daily Efficiency |
>50% |
| Heat Loss Coefficient |
9.5 w/m2.K |
| Stagnation Temperature |
100°C |
| Main Body Warranty |
3 Years |
| Ships/Arrives |
Freight/On Pallet |
| Ready To Install |
Yes, Major Components Included |
| SunMaxx Direct |
Please call 1-800-786-0329 for prices
|
| Pre-Order Today! |
Call: (800) 653-8540 x453 |
