Flat Plate Solar Collectors for your Hot Water Heaters
Flat Plate Solar Collectors from SunMaxx are an affordable, efficient way to heat hot water using the power of the sun in warmer, less cloudy, southern climates. Our SunMaxx FP Flat Plate Solar Collectors cost only a fraction of Evacuated Tube Solar Collectors and they are almost 50% less expensive than the leading national competitor.
Each SunMaxx FP can be utilized in closed and open loop systems. They are efficient enough to provide 65-80% of a typical home's hot water requirement. BelowSee the technical specifications for the SunMaxx FP, and place an order below.
| Specifications & Ordering |
|
| Dimensions |
80" x 39" x 3.75" |
| Weight |
81 Lbs |
| Setup Angle |
20 - 90 Degrees |
| Efficiency |
78.1% |
| BTU Output |
6000BTU/Hour |
| Volume |
1.61 Gallons |
| Nominal Flow Rate |
13 - 80 Gallons/Hour |
| Gross Area |
21.93 Ft (2.03 m2) |
| Absorber Area |
18.68 Sq Ft (1.73 m2) |
| Cover Material |
Patterned Tough Low Iron Glass |
| Casing Material |
Aluminum (sea water resistant) |
| Absorber Material |
Red Copper |
| Isulation Material |
40mm Mineral Wood |
| Maximum Operating Temperature |
391 oF (200 oC) |
| Maximum Operating Pressure |
160 PSI |
| SunMaxx Direct! |
|
| Buy Today! |
Call (800) 653-8540 x453 |
| Product Brochures |
View product brochures |
| |
For More Information or to Place an Order:
|
|
